The Conroe is on doing 3.465GHz stable with the FSB @ 385MHz, which means that the DDR2 RAM is now running at 770MHz, even thought they are rated at 667MHz!

I recall trying 380MHz and having it POST @ 3.510GHz, but failing Prime95. I didn’t attempt pushing it past 385, but will do that over the next few days and see where it starts to get all wobbly. I’ll have screenies up in a bit as they are on the SD card attached to this machine

On another note, it seems that I’m overloading the mains circuit in my lab and I really wasn’t suprised to find a 5A trip installed in the mains tripbox-thinggy. Need to get that swapped over to a 16A unit asap…