PWM Fan Controller
I designed, coded, tested and completed building a PWM fan controller to reduce the screaming off the Delta inside my Conroe box.
This is the full setup, with the breadboarded circuit connected to the front faceplate:
The circuit in a bit more detail:
Notice the minimum setting on the knob. The DMM on the left is showing the dutycycle percentage!
The maximum setting, notice how the pulse is on longer!
Click here to read more on this project!
- MARV Update…
- Ubuntu: JMicron fix?
- C2D E6600 Rebuild…
- Gigabyte GA-965P-DQ6 BIOS @ F4
- Wiring Update…
I hit a serious problem earlier on in the day. I had failed to notice that the PWM5 port on the 18F1330 was sharing the PGD pin and as such after each flashing of the MCU, the 3rd motor would not fun...
Thanks to the lovely souls @ the Ubuntu Forums believe that a patch for the JMicron PATA controller has been backported to todays build of Edgy Eft. Grab it here and see if you have any success on ...
Some might remember my ranting around this time, two years back in 2006. It was to do with the Gigabyte GA-965P-DQ6 mainboard and an incompatibility with the JMicron controller and Ubuntu (Edgy Eft a...
Gigabyte have finally gotten off their bottoms and have released the F4 BIOS for the DQ6. As of late they have been favouring the DS3 etc, that said they have also released a plethora of 'beta' BIOSe...
Had a bit of a scare today, when my ICD2 programmer simply refused to work. Just when I had given up, MPLAB uploaded new software to it and it is back to working properly...I hope! Progress is now...